All

1. Classification by place of origin: German embroidered cloth, French embroidered cloth, Japanese Olympu embroidered cloth, Korean embroidered cloth, Thai embroidered cloth and Chinese embroidered cloth. It is recommended to use the embroidered cloth or Chinese embroidered cloth that is just beginning to contact the cross stitch. Among them, the Korean single embroidery cloth is of acceptable quality and the price is reasonable.2. According to the grid: The size of the embroidered cloth is based on CT, which can be generally divided into 18ct, 14ct, 11ct, 9ct and so on. (The larger the number, the smaller the grid.)3. Classification by texture: cotton embroidered cloth, linen embroidered cloth and plastic embroidered cloth (used mostly for embroidered pendants, ferrules).4. Classification by color: The color is divided into: linen, white, black, red, blue, and the like.

For various reasons, it is inevitable that errors will occur, and if it is a small error, the correct color can be placed on the wrong color;If a color block is misplaced, then the wrong row is removed, and then the color is used to reinforce the upper row without having to be completely removed;If there is a lot of gaps or misplaced, then there is no other way to remove them all.

Embroidery, commonly known as "embroidery", is a technique in which the needles are threaded on the already processed fabrics, pierced according to the design requirements, and the embroidery threads are organized into various patterns and colors through the needles.Color embroidery refers to the embroidery technique of making various patterns with various colored embroidery threads. It has the characteristics of embroidered flat clothes, rich stitching, fine stitches and vivid colors. It is widely used in clothing accessories. The color change of the color embroidery is also very rich. It uses the line to write the pen, through the overlapping, juxtaposition and interlacing of a variety of colored embroidery threads to produce a sleek color effect. In particular, the trocar method is used to express the subtle changes in the color of the pattern. The color is deep and harmonious, and the rendering effect of Chinese painting is achieved.The main feature of the bag-stem embroidery is to use a thicker line to make a bottom or use a cotton pad to make the pattern bulge, and then embroider with the embroidery thread, and the flat stitch method is used. The stalk embroidered pattern is elegant and elegant, with a three-dimensional sense and strong decoration. It is also called high embroidery. In Suzhou embroidery, it is called convex embroidery. The stalk embroidery is suitable for embroidering the smaller pattern of the block surface and the narrow-wing flower, such as chrysanthemum, plum, etc., usually embroidered with a single line.The embroidered embroidery, also known as the empty embroidery, is an embroidering method with certain difficulty and effect. Its biggest feature is that in the embroidering process, the hole is cut according to the pattern, and a variety of pattern combinations are embroidered in different ways in the cut hole to make the embroidered surface. L has both free and easy field flowers, and Lingyue beautiful floor flowers, imaginary and real, full of fun. The embroidery is elegant and refined.Applique embroidery, also known as applique embroidery, is an embroidery form that sews other fabrics on the clothing. The stitching of Chinese Su embroidery is also in this category. The embroidering method is to cut the decal cloth according to the pattern requirement, and stick it on the embroidered surface, or to pad cotton and the like between the decal cloth and the embroidered surface, so that the pattern is raised and has a three-dimensional effect. After sticking, use a variety of stitches to lock the edges. The appliqué embroidering method is simple, the pattern is mainly block-shaped, and the style is unique and generous.Nail thread embroidery, also known as plate stem embroidery or thread embroidery, is an embroidery method for embroidering various ribbons and cords on a garment or textile. Commonly used nailing methods are nail nails and dark nails. The former stitches are exposed on the wire stems, and the latter are hidden in the thread stems. The nail embroidering method is simple and has a long history. Its decorative style is elegant and generous, and it has been widely used in kimonos in recent years. Sequin embroidery, also known as beaded embroidery, is made of hollow beads, bead tubes, artificial gemstones, glittering sequins, etc., embroidered on clothing to produce jewels and dazzling effects, and is generally used in stage performance clothes. In order to increase the beauty and appeal of clothing, it is also widely used in uppers, bags, jewelry boxes and so on.Cross stitch, also known as cross peach, is a traditional embroidery method widely spread among the people. The needle method is very simple, that is, according to the warp and weft orientation of the cloth, the diagonal cross stitches of the same size are arranged into the pattern required by the design. Due to the characteristics of the stitching method, the pattern of the cross stitch is generally simple and succinct, and the structure is rigorous, and the pattern style of the symmetrical layout is often used. There are also realistic styles, and themes are mostly natural flowers and plants. The cross stitch has a rich folk decoration style.Embroidery is also called flat ribbon embroidery. It is directly embroidered on the fabric with a ribbon as an embroidery thread. The enamel embroidery is soft, colorful, and the pattern is striking and three-dimensional. It is a novel and kimono decoration form. The drawing embroidery is a very special category in embroidery. The embroidery method is to draw a certain amount of warp and weft on the fabric according to the design part, and then use the cloth left on the cloth to embroider. The line is regularly braided and braided, and the through-holes of the through-holes are combined to form various patterns. Embroidered surface with drawn yarn has a unique mesh effect, beautiful and delicate, exquisite and transparent, and very decorative. Due to the difficulty of through-drawing, most of the drawn embroidery patterns are simple geometric lines and block faces, which are exquisitely decorated in a piece of embroidery.The stamped yarn embroidery, also known as Najin, is one of the traditional embroidery forms. It is embroidered strictly on the base of the square yarn by the grid of eyes. Not only the pattern is beautiful, but also the rich arrangement of the lines, horizontal and oblique, but the empty eyes between the patterns must be aligned.

1. Heat treatment with 10% aqueous acetic acid solution or 20% to 30% potassium iodide aqueous solution. 2. Immediately wipe with warm salt water and then rinse with water. 3. Add an appropriate amount of ammonia water to the clean water that has been placed in the washing liquid for washing. 4. Place the clothed clothes on the flat table and iron them repeatedly until the cloth is peeled off.

How do patch stickers come down? How to use the down jacket patch? You can go to the tailor shop to let the tailor help you make up, or go to the supermarket to buy the kind of smiley map that specializes in making up clothes. There are many styles and some are very cute.Patching method of ironing:1. Keep the back side clean before ironing. Adjust the temperature to suit the temperature of the clothes according to the method of using the iron.2. Put the cloth on the appropriate position (do not tear off the glue), burn it back and forth a few times, usually burn for about 15 seconds.3. To prevent burns, put a thin cotton cloth on the cloth (not a faded cloth). After ironing, check the edges to see if it is hot, and burn a few times on the edges.4. It is also necessary to determine the temperature according to the thickness of the cloth. If it is thicker, it must be higher in temperature and longer in ironing. For particularly thick cloth, you can burn it a few times on the back. 5. For cloths with sequins or metal wires, firstly iron them from the reverse side. After the cloth is fixed firmly, trim the corners from the front to avoid damaging the front sequins or other accessories.6. The best way is to use a needle thread to sew a few stitches on the side of the cloth after it is burned. This is more firm and docile.7. If you don't have an iron at home, you can also sew the cloth directly on the clothes with the same color line.

The early badges were layered with a layer of cloth and then cut to highlight its color and pattern. Because embroidery is a decorative art, these badges made of cloth naturally include some patterns and words. Unlike other textile decorative forms such as weaving and knitting, embroidery is the addition of something to already woven fabrics. Today, some badges are made by hand, some are single-head sewing machines, and a large number are embroidered on the shuttle embroidery machine and the multi-head embroidery machine.Woven emblems:Weave badges are similar to the trademarks on shirts and jackets. A large number of badges can be made on the trademark machine and it looks like a trademark. They lack the three-dimensional effect of embroidery, and the color is very expensive, and the wearing effect is not as good as the embroidery. The main advantage is that you can make the text small and smaller than any other way. Weaving badges can be very cheap if they are manufactured in large quantities. When the production volume is small, the cost of booting and pattern design is high. Woven badges are usually soft and require a strong pad when wrapping.The woven badges are produced according to the weaving process, and the woven fabric is woven at the same time. The colored lines are controlled by the Jacquard device to form a badge pattern.Printed and screened emblems:The color and text of the pattern can be printed on the cloth to form a badge by printing and spraying. However, its durability and wearability are very different from the requirements. The advantage of this method is that it can be produced in small quantities because the cost of the equipment is very low.Bullion:This badge is handmade and is most common in Pakistan and Jordan. It is by hand embroidering gold and silver threads directly on the base fabric to form a pattern. The egg-shaped seal on the helmet of the Navy officer, the badge from the commander to the five-star admiral, and the badges worn by some golf and country club members are typical examples of such embroidery badges. It is particularly time-consuming and tedious to make such a badge. Although there are many people who work on this job, it is difficult to find a good handwork.Hand embroidered:This is a kind of badge that has a unique appreciation and is embroidered with ordinary thread. Few people have time to do this old-time embroidery today. It freely embroiders a badge on the sewing machine with a thread similar to that on a shuttle, which requires some artistic skill.This art is used to transfer patterns to fabrics by punching the sketches and sprinkling the pattern on the fabric or using a soft pencil to draw from a sketch. The sewing machine then moves the hoop of the fixed fabric by hand while operating the needle on the sewing machine. To do this kind of work, you must be steady, your eyes should be fast, and the most important thing is to have good skills through long-term practice. This approach has been done in small batches and samples until the mid-1970's, which became commonplace due to the use of computers on it. Since the computerized version of the tape can be perfectly reproduced on a multi-head embroidery machine in a short period of time, this art of handcrafting began to be lost.Photo emblems:This badge requires a 4-color negative, which is segregated and printed on a polyester cloth by sublimation. The badge and the hot stamping film stick together and harden, then edging. In this way, color photographs are directly imprinted on the fabric to form the final badge.Chenille:Paper padding refers to a thing that is attached to the back of an embroidered badge to fix the fabric and facilitate embroidery. The paper lining is used during embroidering. After the embroidery is finished, if you want to add the adhesive, add the adhesive on the other machine. The embroidered badge with the backing is not embroidered. Velcro is also a kind of embroidered badge: it means weaving nylon into two rows, one of which is countless small hooks and the other is a small round hole. When the two rows are combined, they can be tight. Stuck. It is durable, easy to pull, cleanable, and available in a wide variety of colors. HOOK H and LOOP refer to the face and matte side of the Velcro, respectively.

The embroidery badge is made by embroidering the LOGO or the pattern on the fabric through a computer through an embroidery machine, and then performing a series of cutting and modification on the fabric, and finally making a cloth badge with embroidery, that is, an embroidery badge. Embroidery badges are also important in the production of various badges. They are widely used in a variety of casual wear, hats (cap badges), epaulettes (shoulder badges), etc., and are one of the badges with a large amount of production. Embroidery badges can be customized to suit the artwork or the artwork. Mainly after scanning, drawing (if it is customized according to the draft, the two steps are omitted), pattern making, electric embroidery, glue (mainly soft rubber, hard rubber, self-adhesive), trimming, burning edge (hem) ), quality inspection, packaging and other procedures.1. Design the artwork based on the sample, the customer's ideas, etc. For the reproduction of embroidery, the first draft does not need to be as correct as the finished product. We just need to know the idea or sketch, the color, and the required size. It is not like the production anniversary badge, the commemorative coin to be redrawn to be able to copy. We say “repainting” because it is not necessary to embroider it. However, people who have certain embroidery functions are required to perform the copying work.2. After the customer confirms the design and color, the design pattern is enlarged into a 6-times large technical drawing, and the version of the embroidery machine is guided according to the enlarged drawing. The loom should have the skills of artists and graphic artists. The stitches on the diagram suggest the type and color of the thread used, and also consider some of the requirements of the pattern maker.3. The pattern maker uses a special machine or computer to print the version. From tape to disc, today, all kinds of pattern-making tapes can be easily converted to any other format regardless of the format. At this stage, the human factor is important, and only those skilled craftsmen can be used as badge designers. People can verify the patterning tape by various means. For example, on a shuttle machine, a proofing machine that can make samples can let the pattern maker keep watching the embroidery being embroidered. When using a computer, the sample is taken only when the pattern is actually tested and cut on the prototype.